Manual ((free)): Qidi X-pro

This is where most users throw their hands up. The refers to this as "Offset Calibration." Because the two nozzles are fixed side-by-side, the printer needs to know exactly how far apart they are in X and Y space.

| Frequency | Action | |-----------|--------| | Before every print | Wipe print surface with isopropyl alcohol. | | Weekly | Check belt tension (should twang like a bass note). Lubricate Z-axis leadscrew with PTFE grease. | | Monthly | Clean extruder gears (use brush). Check PTFE tubes for wear. | | As needed | Replace nozzle (7mm socket, heat to 200°C before unscrewing). | qidi x-pro manual