Audi - A4 B9 Coding List [verified]
The car remembers your last Auto-Stop setting. If you turn it off, it stays off next time you start the car.
Always run a full diagnostic scan and save the results before making any changes. This provides a backup of your original coding. audi a4 b9 coding list
To perform these modifications, you will need one of the following diagnostic tools: The car remembers your last Auto-Stop setting
If you have a 2020+ A4 B9.5 (with the honeycomb grille and touchscreen MMI), note these changes: This provides a backup of your original coding
Start with one feature at a time. Test it. Reboot the MMI. Enjoy the fact that you just unlocked a $1,000 "Premium Plus" feature for free.
: Many owners prefer to disable this fuel-saving feature or set it to remember the last used state. Essential Tools for Coding
| Feature | Adaptation Channel | Value / Change | Notes | | :--- | :--- | :--- | :--- | | | (30)-Assistants_visualisation-Lane_assist_startup_state | Change to On (Default is Off) | Lane keeping is active at every car start. | | ACC Last Distance Memory | (1)-Adaptive Cruise Control-last_operation_acceptance_of_distance | Change to On | Remembers last following distance setting. | | Traffic Sign Recognition (TSR) | Requires calibration, but enable via (18)-Car_Function_List_BAP_Gen2-traffic_sign_recognition_0x21 | Change to Activated | Shows speed signs in VC (needs camera). |