While oscam.conf sets the stage, the oscam.server file provides the content. This configuration file is responsible for defining the "Readers." In the context of a card server, a Reader is the interface—either a physical smart card reader (like a Smargo or internal slot) or a remote connection to another server. This file is where the hardware meets the software. The administrator must specify parameters such as the device path (e.g., /dev/ttyUSB0 ), the card frequency, and the specific encryption protocols the card uses. The complexity of oscam.server arises from the diversity of smart cards; different providers use different encryption systems (such as Irdeto, Viaccess, or Conax), and each requires fine-tuned timing and initialization strings (atr). A misconfigured Reader will result in the server failing to detect the card or failing to extract the necessary keys, rendering the entire system obsolete.
[reader] label = local_card protocol = internal device = /dev/sci0 cardmhz = 357 mhz = 450 group = 1 emmcache = 1,3,2 blockemm-unknown = 1 blockemm-g = 1 au = 1 caid = 0x1830 detect = cd mhz_auto = 1 oscam+server+config
################################## [reader] label = card_canal_digital protocol = smartreader device = 008:002 # Bus:Device from lsusb caid = 0x0B00 mhz = 357 group = 1 au = 1 blockemm-unknown = 1 While oscam
/usr/local/bin/oscam -b -c /etc/tuxbox/config -d 255 The administrator must specify parameters such as the